MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 11 Nyloc, Neutral, Locknut
Nut, Steel, M 55x2
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is not currently available from our stocks.
Despatch date information is on request.
TW121, Timken, Locking washer
Washer, Steel, EAN code: 0053893817675
AN 22, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660467
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
KMT 20, SKF, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 7316577655080
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
MB 27, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011695
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
This item is not currently available from our stocks.
Despatch date information is on request.
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
MB 10, Neutral, Locking washer
Tab Washer, Steel
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KMT 10, SKF, Precision Lock nut
Nut, Steel, M 50x1.5, EAN code: 7316577314062
KMK 4, SKF, Lock nut with integral locking screw
Nut, Steel, M 20x1, EAN code: 7316571483542
KMK 9, SKF, Lock nut with integral locking screw
Nut, Steel, M 45x1.5, EAN code: 7316571106991
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.