AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
MB 52, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001412
MB 56, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011794
ZW 65X72, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351094
This item is not currently available from our stocks.
Despatch date information is on request.
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
KM 38, SKF, Locknut
Nut, Steel, M 190x3, EAN code: 7316577011343
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KM 15 Nyloc, Neutral, Locknut
Nut, Steel, M 75x2
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.