MB 6, Neutral, Locking washer
Tab Washer, Steel
MB 7, Neutral, Locking washer
Tab Washer, Steel
ZW 85X100, SKF, Spacing washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
HM 3048, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 240x4, EAN code: 7316577010704
HM 3060, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 300x4, EAN code: 7316577114938
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
KMTA 14, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 70x1.5, EAN code: 7316577655288
KMTA 5, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 25x1.5, EAN code: 7316577655196
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
TW107, Timken, Locking washer
Washer, Steel, EAN code: 0053893822044
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
Z 205, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351162
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KM 20 Nyloc, Neutral, Locknut
Nut, Steel, M 100x2
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.