MS 3044, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011800
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
MB 24, Neutral, Locking washer
Tab Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 48, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001405
MB 52, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001412
MB 9 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571155333
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 28, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571081526
MBL 30, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577055644
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
TN08, Timken, Lock nut
Nut, Steel, EAN code: 0053893000800
This item is not currently available from our stocks.
Despatch date information is on request.
TN09, Timken, Lock nut
Nut, Steel, EAN code: 0053893000824
This item is not currently available from our stocks.
Despatch date information is on request.
W 19, SKF, Locking washer
Washer, Steel, EAN code: 7316576676147
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
W 32, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
W 34, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TW103, Timken, Locking washer
Washer, Steel, EAN code: 0053893822013
This item is not currently available from our stocks.
Despatch date information is on request.
TW113, Timken, Locking washer
Washer, Steel, EAN code: 0053893822082
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.