KM 12, Timken, Locknut
Nut, Steel, M 60x2, EAN code: 0087796028562
KMFE 16, SKF, Lock nut with integral locking screw
Nut, Steel, M80x2, EAN code: 7316571585574
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 17, NKE, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 9008745720819
KMT 9, NKE, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 9008745233746
TN09, Timken, Lock nut
Nut, Steel, EAN code: 0053893000824
This item is not currently available from our stocks.
Despatch date information is on request.
W 22, Timken, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
ZW 42X52, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351087
This item is not currently available from our stocks.
Despatch date information is on request.
AN 29, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527524
AW07, NTN, Locking washer
Washer, Steel
HM 3072, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 360x5, EAN code: 7316577115010
MB 10 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 12 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 14 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 14, Timken, Locking washer
Tab Washer, Steel, EAN code: 0013992166968
MB 18A, Neutral, Locking washer
Tab Washer, Steel
MB 1, Neutral, Locking washer
Tab Washer, Steel
MB 1 STAINLESS, Neutral, Locking washer
Tab Washer, Stainless steel
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 22, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028272
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.