MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
KMT 9, SKF, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 7316577294951
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
W 20, SKF, Locking washer
Washer, Steel, EAN code: 7316576676154
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
MB 56, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011794
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
KM 38, SKF, Locknut
Nut, Steel, M 190x3, EAN code: 7316577011343
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.