MB 7, Neutral, Locking washer
Tab Washer, Steel
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
KMFE 10, SKF, Lock nut with integral locking screw
Nut, Steel, M50x1.5, EAN code: 7316571585116
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
TW140, Timken, Locking washer
Washer, Steel, EAN code: 0053893821344
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KM 2, Neutral, Locknut
Nut, Steel, M 15x1
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 8, Neutral, Locknut
Nut, Steel, M 40x1.5
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.