MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
MB 5, Neutral, Locking washer
Tab Washer, Steel
KM 21, Neutral, Locknut
Nut, Steel, M 105x2
KMT 20, Neutral, Precision Lock nut
Nut, Steel, M 100x2
Z 006, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571326160
This item is not currently available from our stocks.
Despatch date information is on request.
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
HM 3052, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 260x4, EAN code: 7316577010711
HM 3160, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 300x4, EAN code: 7316577010766
This item is not currently available from our stocks.
Despatch date information is on request.
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
Z 206, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571501260
Z 309, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351261
MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 38, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011770
MB 6, Neutral, Locking washer
Tab Washer, Steel
MB 8, Neutral, Locking washer
Tab Washer, Steel
KM 1 Nyloc, Neutral, Locknut
Nut, Steel, M 12x1
KM 20 Nyloc, Neutral, Locknut
Nut, Steel, M 100x2
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.