KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KM 3 Nyloc, Neutral, Locknut
Nut, Steel, M 17x1
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
Z 210, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316577300782
MB 23, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011664
MB 31, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577105653
MB 33, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011749
KMK 15, SKF, Lock nut with integral locking screw
Nut, Steel, M 75x2, EAN code: 7316570506051
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
KML 40, NKE, Locknut
Nut, Steel, M 200x3, EAN code: 9008745233432
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
KMTA 14, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 70x1.5, EAN code: 7316577655288
KMTA 22, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 110x2, EAN code: 7316577655356
TAN16, Timken, Lock nut
Nut, Steel, EAN code: 0053893001272
This item is not currently available from our stocks.
Despatch date information is on request.
TAN19, Timken, Lock nut
Nut, Steel, EAN code: 0053893001371
This item is not currently available from our stocks.
Despatch date information is on request.
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
This item is not currently available from our stocks.
Despatch date information is on request.
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.