MB 8, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570517996
MB 5, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571066462
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
N 12, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280721
HM 3060, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 300x4, EAN code: 7316577114938
KM 11 Nyloc, Neutral, Locknut
Nut, Steel, M 55x2
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
MB 16, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770222
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
KM 17, SKF, Locknut
Nut, Steel, M 85x2, EAN code: 7316571770208
W 10, SKF, Locking washer
Washer, Steel, EAN code: 7316571385556
KM 14, SKF, Locknut
Nut, Steel, M 70x2, EAN code: 7316571770277
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KMK 11, SKF, Lock nut with integral locking screw
Nut, Steel, M 55x2, EAN code: 7316577711755
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
W 08, SKF, Locking washer
Washer, Steel, EAN code: 7316571385532
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.