KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KMT 18, SKF, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 7316577655073
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
KM 23, SKF, Locknut
Nut, Steel, M 115x2, EAN code: 7316577011213
KM 30, Neutral, Locknut
Nut, Steel, M 150x2
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KM 9, Neutral, Locknut
Nut, Steel, M 45x1.5
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 30, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011725
MB 7, Neutral, Locking washer
Tab Washer, Steel
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
This item is not currently available from our stocks.
Despatch date information is on request.
KM 15, FAG, Locknut
Nut, Steel, M75x2, EAN code: 4012801052528
This item is not currently available from our stocks.
Despatch date information is on request.
KM 29, Neutral, Locknut
Nut, Steel, M 145x2
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
KML 40, NKE, Locknut
Nut, Steel, M 200x3, EAN code: 9008745233432
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.