KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
KMT 8, SKF, Precision Lock nut
Nut, Steel, M 40x1.5, EAN code: 7316577655011
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 36, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571033082
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
This item is not currently available from our stocks.
Despatch date information is on request.
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 14 Nyloc, Neutral, Locknut
Nut, Steel, M 70x2
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 24, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571498904
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
N 13, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385488
Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
KMT 17, SKF, Precision Lock nut
Nut, Steel, M 85x2, EAN code: 7316577655066
KMT 9, SKF, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 7316577294951
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
TW112, Timken, Locking washer
Washer, Steel, EAN code: 0053893822075
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.