AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
KM 38, SKF, Locknut
Nut, Steel, M 190x3, EAN code: 7316577011343
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
ZW 65X72, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351094
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.