MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
KMT 22, SKF, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 7316577655097
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KM 4, SKF, Locknut
Nut, Steel, M 20x1
MB 13, Neutral, Locking washer
Tab Washer, Steel
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
N 06, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280738
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
W 13, SKF, Locking washer
Washer, Steel, EAN code: 7316571385587
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KMK 6, SKF, Lock nut with integral locking screw
Nut, Steel, M 30x1.5, EAN code: 7316577711137
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 13, Neutral, Locknut
Nut, Steel, M 65x2
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
KMK 8, SKF, Lock nut with integral locking screw
Nut, Steel, M 40x1.5, EAN code: 7316570172515
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.