W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
This item is not currently available from our stocks.
Despatch date information is on request.
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
KM 10 Nyloc, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 14, Neutral, Locknut
Nut, Steel, M 70x2
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
KMK 16, SKF, Lock nut with integral locking screw
Nut, Steel, M 80x2, EAN code: 7316570831580
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
HM 3072, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 360x5, EAN code: 9008745224355
This item is not currently available from our stocks.
Despatch date information is on request.
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KM 6, Neutral, Locknut
Nut, Steel, M 30x1.5
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
MB 10, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.