MB 9, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758316
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
This item is not currently available from our stocks.
Despatch date information is on request.
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
KM 13, SKF, Locknut
Nut, Steel, M 65x2, EAN code: 7316571353470
KM 33, SKF, Locknut
Nut, Steel, M 165x3, EAN code: 7316577011312
TN11, Timken, Lock nut
Nut, Steel, EAN code: 0053893000923
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
KMK 6, SKF, Lock nut with integral locking screw
Nut, Steel, M 30x1.5, EAN code: 7316577711137
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.