KMFE 8, SKF, Lock nut with integral locking screw
Nut, Steel, M40x1.5, EAN code: 7316571585093
KMK 11, SKF, Lock nut with integral locking screw
Nut, Steel, M 55x2, EAN code: 7316577711755
HM 3072, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 360x5, EAN code: 9008745224355
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 15, SKF, Lock nut with integral locking screw
Nut, Steel, M 75x2, EAN code: 7316570506051
KMT 30, SKF, Precision Lock nut
Nut, Steel, M 150x2, EAN code: 7316577655134
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
TAN22, Timken, Lock nut
Nut, Steel, EAN code: 0053893001494
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
MB 13, Neutral, Locking washer
Tab Washer, Steel
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
KMK 6, SKF, Lock nut with integral locking screw
Nut, Steel, M 30x1.5, EAN code: 7316577711137
N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
Z 009, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570221565
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.