KMT 26, SKF, Precision Lock nut
Nut, Steel, M 130x2, EAN code: 7316577655110
KMT 4, Neutral, Precision Lock nut
Nut, Steel, M 20x1
KMT 6, NKE, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 9008745233715
KMTA 8, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 40x1.5, EAN code: 7316577655226
Z 001, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571353548
Z 206, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571501260
Z 208 F, SKF, Sealing washers, F design
Washer, Steel, EAN code: 7316577300744
Z 211, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351186
Z 306, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316570756326
ZW 70X80, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351100
ZW 75X85, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351117
AN 08, NSK, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 00029176527401
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
AN 26, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660481
This item is not currently available from our stocks.
Despatch date information is on request.
MB 12, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880229
This item is not currently available from our stocks.
Despatch date information is on request.
HM 46 T, Timken, T lock/dismounting nut
Nut, Steel, Tr 230x4, EAN code: 0087796250932
This item is not currently available from our stocks.
Despatch date information is on request.
HM 56 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 7316577010667
This item is not currently available from our stocks.
Despatch date information is on request.
MS 3044, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011800
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.