Oil seals

Radial shaft seals sit between rotating and stationary components, or two components in relative motion. They have two main parts. One is a cylindrical outer covering with an interference fit that seals statically against the housing bore. The second, a sealing lip, seals dynamically and statically against the shaft. Its sealing edge presses against the counter face surface of the shaft with a defined radial load.

 

21-40 of 6223 products

Radial shaft seals

Radial shaft seals are used between rotating and stationary machine components or between two components in relative motion and consist of two main parts:

 

  • A cylindrical outer covering of sheet steel (case) or an elastomer that has the requisite interference fit to seal statically against the housing bore.
  • A sealing lip made of an elastomeric or thermoplastic material that seals dynamically and statically against the shaft. The lip has a sealing edge that is formed by moulding, cutting or grinding. It is normally pressed against the counterface surface of the shaft, with a defined radial load, by a garter spring. The edge of the sealing lip and the shaft counterface surface form the most important functional area of a radial shaft seal. The sealing effect of the lip can be enhanced by designing the contact area of the lip with hydrodynamic features.

 

Some radial shaft seal designs have an auxiliary lip that protects the primary sealing lip from dust and other contaminants. A suitable lubricant in the space between the primary sealing lip and the auxiliary lip can reduce wear and delay corrosion. Contaminants that have passed the auxiliary lip will eventually cause damage in the counterface surface area. A build-up of heat can also occur between the two lips, resulting in premature wear.

 

Radial shaft seals are used in a multitude of applications. Because of the importance of radial shaft seals for the operational reliability and service life of machines and equipment, both seal manufacturers and users are equally interested, to some degree, in standardization. These cover boundary dimensions, tolerances, material specifications, test methods and terminology as well as the basic outside diameter constructions and sealing lip arrangements.

 

The terminology used in this chapter is listed for metal-cased seal and for rubber outside diameter seal.

Filter Results

Filter Results
Filter

Brand

  • SKF (3821)
  • Neutral (1266)
  • Freudenberg Sealing Technologies (638)
  • Timken (426)
  • IKO (54)
  • INA (18)

Stock

  • Just show products in stock (1309)

id (mm)

  • 4 (2)
  • 5 (2)
  • 6 (23)
  • 7 (11)
  • 7.874 (1)
  • 7.925 (1)
  • 8 (27)
  • 9 (8)
  • 9.525 (3)
  • 9.53 (5)
  • 10 (62)
  • 10.922 (1)
  • 11 (5)
  • 11.13 (2)
  • 11.989 (1)
  • 12 (93)
  • 12.7 (29)
  • 13 (5)
  • 14 (37)
  • 14.275 (1)
  • 14.3 (5)
  • 14.3002 (1)
  • 15 (83)
  • 15.09 (1)
  • 15.7 (1)
  • 15.748 (2)
  • 15.875 (6)
  • 15.88 (13)
  • 16 (50)
  • 16.76 (1)
  • 16.99 (2)
  • 17 (93)
  • 17.272 (1)
  • 17.45 (2)
  • 17.4625 (1)
  • 17.48 (6)
  • 18 (57)
  • 19 (32)
  • 19.05 (37)
  • 19.1 (1)
  • 19.84 (1)
  • 20 (170)
  • 20.625 (1)
  • 20.65 (3)
  • 21 (16)
  • 22 (77)
  • 22.098 (3)
  • 22.225 (7)
  • 22.23 (20)
  • 23 (9)
  • 23.83 (3)
  • 24 (49)
  • 24.587 (3)
  • 24.6 (2)
  • 24.61 (2)
  • 25 (219)
  • 25.4 (53)
  • 26 (32)
  • 26.924 (2)
  • 26.975 (1)
  • 27 (39)
  • 28 (93)
  • 28.575 (15)
  • 28.58 (26)
  • 28.6 (2)
  • 29 (1)
  • 29.36 (2)
  • 29.4 (1)
  • 30 (214)
  • 30.15 (5)
  • 30.1625 (2)
  • 30.1752 (2)
  • 30.18 (6)
  • 31 (1)
  • 31.7 (1)
  • 31.75 (36)
  • 31.8 (2)
  • 32 (120)
  • 32.537 (1)
  • 33 (13)
  • 33.274 (3)
  • 33.325 (5)
  • 33.3375 (1)
  • 33.35 (3)
  • 33.3502 (1)
  • 33.68 (1)
  • 33.7 (1)
  • 33.731197 (1)
  • 34 (29)
  • 34.7 (1)
  • 34.798 (1)
  • 34.9 (6)
  • 34.925 (22)
  • 34.93 (28)
  • 35 (211)
  • 35.0012 (1)
  • 35.53 (1)
  • 36 (39)
  • 36.322 (1)
  • 36.5 (3)

od (mm)

  • 12 (2)
  • 14.275 (1)
  • 15 (2)
  • 15.748 (1)
  • 15.875 (1)
  • 16 (23)
  • 17 (1)
  • 18 (16)
  • 19 (20)
  • 19.02 (2)
  • 19.05 (3)
  • 20 (19)
  • 20.83 (1)
  • 21.41 (1)
  • 22 (67)
  • 22.225 (7)
  • 22.23 (6)
  • 23 (4)
  • 23.622 (1)
  • 23.7 (1)
  • 24 (53)
  • 25 (40)
  • 25.37 (14)
  • 25.4 (7)
  • 26 (38)
  • 26.97 (1)
  • 27 (5)
  • 27.03 (1)
  • 28 (59)
  • 28.55 (17)
  • 28.575 (7)
  • 28.58 (1)
  • 28.6 (1)
  • 28.651 (1)
  • 28.651201 (2)
  • 29 (6)
  • 29.972 (1)
  • 30 (98)
  • 30.15 (2)
  • 31 (1)
  • 31.2 (1)
  • 31.75 (22)
  • 31.78 (1)
  • 31.8 (1)
  • 31.851599 (2)
  • 31.88 (1)
  • 32 (84)
  • 33 (2)
  • 33.22 (1)
  • 33.223 (1)
  • 33.274 (1)
  • 33.32 (4)
  • 33.325 (1)
  • 34 (6)
  • 34.925 (8)
  • 34.93 (14)
  • 35 (126)
  • 36 (25)
  • 36.5 (4)
  • 36.525 (1)
  • 36.53 (1)
  • 37 (64)
  • 38 (48)
  • 38.02 (1)
  • 38.07 (19)
  • 38.075 (2)
  • 38.1 (14)
  • 39.649 (1)
  • 39.65 (4)
  • 39.67 (1)
  • 39.75 (1)
  • 40 (163)
  • 41.2 (2)
  • 41.25 (14)
  • 41.275 (7)
  • 41.28 (1)
  • 41.326 (1)
  • 41.3512 (2)
  • 42 (129)
  • 42.5 (1)
  • 42.8 (1)
  • 42.82 (3)
  • 42.824 (1)
  • 42.85 (2)
  • 42.8625 (1)
  • 43 (11)
  • 44 (24)
  • 44.4 (1)
  • 44.45 (10)
  • 44.5 (16)
  • 44.501 (1)
  • 45 (77)
  • 45.24 (1)
  • 46 (10)
  • 46.43 (6)
  • 46.431 (2)
  • 47 (192)
  • 47.02 (1)
  • 47.04 (1)
  • 47.117 (1)

Width (mm)

  • 3 (6)
  • 3.048 (1)
  • 3.16 (1)
  • 3.175 (6)
  • 3.18 (8)
  • 3.6 (1)
  • 3.96 (2)
  • 4 (19)
  • 4.3 (1)
  • 4.445 (2)
  • 4.5 (3)
  • 4.572 (1)
  • 4.7 (2)
  • 4.75 (5)
  • 4.7752 (1)
  • 4.78 (17)
  • 5 (105)
  • 5.16 (1)
  • 5.334 (1)
  • 5.461 (1)
  • 5.5 (1)
  • 5.7 (2)
  • 5.8 (1)
  • 5.94 (1)
  • 6 (176)
  • 6.3 (1)
  • 6.35 (261)
  • 6.4 (14)
  • 6.5 (9)
  • 6.502 (3)
  • 6.86 (1)
  • 7 (1302)
  • 7.0104 (1)
  • 7.2 (5)
  • 7.366 (1)
  • 7.5 (7)
  • 7.722 (3)
  • 7.9 (10)
  • 7.925 (32)
  • 7.9375 (7)
  • 7.95 (132)
  • 7.9501996 (11)
  • 8 (888)
  • 8.001 (4)
  • 8.255 (1)
  • 8.5 (4)
  • 8.51 (1)
  • 8.74 (1)
  • 8.9 (1)
  • 9 (19)
  • 9.017 (1)
  • 9.119 (2)
  • 9.12 (1)
  • 9.144 (1)
  • 9.5 (15)
  • 9.525 (129)
  • 9.53 (93)
  • 9.652 (1)
  • 10 (1074)
  • 10.03 (1)
  • 10.2 (1)
  • 10.3 (1)
  • 10.312 (1)
  • 10.5 (1)
  • 10.541 (1)
  • 10.668 (1)
  • 10.67 (1)
  • 10.795 (1)
  • 10.8 (1)
  • 10.99 (1)
  • 10.998 (5)
  • 10.9982 (2)
  • 11 (7)
  • 11.1 (19)
  • 11.1125 (1)
  • 11.1252 (8)
  • 11.13 (193)
  • 11.43 (1)
  • 11.51 (3)
  • 11.887 (33)
  • 11.9 (8)
  • 11.91 (9)
  • 11.988 (2)
  • 12 (561)
  • 12.3 (1)
  • 12.6 (1)
  • 12.7 (226)
  • 13 (113)
  • 13.1 (1)
  • 13.487 (1)
  • 13.5 (1)
  • 13.97 (1)
  • 14 (25)
  • 14.275 (15)
  • 14.3 (4)
  • 14.3002 (1)
  • 14.5 (1)
  • 14.605 (2)
  • 14.8 (1)
  • 15 (215)

Seal type

  • Single lip (2724)
  • Double lip (2650)
  • End Cap (44)
  • Springless Lip Arrangment (2)

Chamfer length

  • 3.18 (1)

Outer Material

  • Rubber (Metal reinforced) (4215)
  • Metal-cased (904)
  • Double Metal-cased (324)
  • Metal-cased with sealant coating on the outside diameter (10)
  • Steel (4)

Lip material

  • Nitrile rubber (NBR) (3888)
  • Fluoro rubber (FKM) (1601)
  • Polyacrylate elastomer (ACM) (44)
  • Silicone rubber (MVQ) (6)