- SALES: +44 (0)1709 789 933
Metric, Sleeve, M 125x2
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (Lock nuts requiring a keyway) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately.
| Manufacturer Product Code | AHX2322-100 |
|---|---|
| Basic Product Description | Withdrawal sleeve |
| Measurement | Metric |
| UOM | Each |
| ID or length (mm) | 100 |
| Width or height (mm) | 98 |
| Weight (kg) | 1.958 |
| Thread | M 125x2 |
| Holes for oil injection | Without |