AHX 2314 G, SKF, Withdrawal sleeve, basic design, ISO standards
Metric, Sleeve, M 75x2, EAN code: 7316570733334
$75.53
In stock
- SALES: +44 (0)1709 789 933
Metric, Sleeve, M 75x2, EAN code: 9008745745058
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of stepped shafts. The sleeve is pressed into the bore of the bearing inner ring, which abuts a shaft shoulder or similar fixed component. The sleeve is located on the shaft by a nut or an end plate. KM or HM lock nuts (Lock nuts requiring a keyway) with appropriate locking devices are suitable. Lock nuts are not supplied with the sleeve and must be ordered separately.
| Manufacturer Product Code | AHX2314 |
|---|---|
| Basic Product Description | Withdrawal sleeve |
| Measurement | Metric |
| UOM | Each |
| ID or length (mm) | 65 |
| OD or breadth (mm) | 80 |
| Width or height (mm) | 64 |
| Weight (kg) | 0.47 |
| Thread | M 75x2 |
| Holes for oil injection | Without |
| EAN code | 9008745745058 |
Metric, Sleeve, M 75x2, EAN code: 7316570733334
Metric, Sleeve, M80x2, EAN code: 4012801208864
This item is not currently available from our stocks.
Despatch date information is on request.
Metric, Sleeve, M 75x2, EAN code: 00747023155316
This item is not currently available from our stocks.
Despatch date information is on request.
Metric, Sleeve, M 75x2, EAN code: 0087796247468
This item is not currently available from our stocks.
Despatch date information is on request.