F2BSS 30M-CPSS-DFH, SKF, Foodline - Corrosion resistant Oval flanged unit
Metric, Bearing unit, Standard seals, Gutter sealing system, Food grade grease
F2BSS 35M-CPSS-DFH, SKF, Foodline - Corrosion resistant Oval flanged unit
Metric, Bearing unit, Standard seals, Gutter sealing system, Food grade grease
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
F2BSS 40M-CPSS-DFH, SKF, Foodline - Corrosion resistant Oval flanged unit
Metric, Bearing unit, Standard seals, Gutter sealing system, Food grade grease
PFT 12TF, SKF, Oval 2 Bolt Flanged Unit
Metric, Bearing unit, Bearing steel, Set screw locking, EAN code: 07316571556178
PFT 72, SKF, Y-Bearing Oval Flange (2 Bolt) HOUSING Only
Metric, Bearing unit, EAN code: 07316571030777
UCFL 208/H, SKF, Y-Bearing Oval Flange (2 Bolt)
Metric, Bearing unit, Bearing steel, Seal and flinger on both sides, Grub screw locking, EAN code: 07316579751803
UCFL 209/H, SKF, Y-Bearing Oval Flange (2 Bolt)
Metric, Bearing unit, Bearing steel, Seal and flinger on both sides, Grub screw locking, EAN code: 07316579752466
UCFL 212/H, SKF, Y-Bearing Oval Flange (2 Bolt)
Metric, Bearing unit, Bearing steel, Seal and flinger on both sides, Grub screw locking, EAN code: 07316579752497
Typical Applications
SKF oval 2‑bolt flanged units are widely used where shafts need to be supported against a side wall or plate, including:
- Light and medium‑duty conveyors
- Agricultural and food processing machinery
- Packaging and bottling equipment
- Fans, blowers and small industrial drives
- Textile, printing and general machinery
- OEM equipment and special‑purpose machines
They are particularly useful where a pillow block is impractical, but a simple, reliable bearing support is still required.
What Are SKF Oval 2‑Bolt Flanged Units?
SKF oval 2‑bolt flanged units are pre‑assembled bearing units consisting of:
- A self‑aligning insert bearing (typically a deep groove ball bearing insert)
- An oval flanged housing with two mounting bolt holes
- Integrated seals and, in many cases, a relubrication point
- A locking device to secure the bearing to the shaft
The oval housing is bolted to a flat surface, with the shaft running through the bearing bore. Because the bearing and housing are designed and assembled by SKF, these units offer reliable performance, quick installation and minimal mounting complexity.