MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 19, Neutral, Locking washer
Tab Washer, Steel
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 7, Neutral, Locking washer
Tab Washer, Steel
MB 8, Neutral, Locking washer
Tab Washer, Steel
KM 15, Neutral, Locknut
Nut, Steel, M 75x2
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 2, Neutral, Locknut
Nut, Steel, M 15x1
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 18, Neutral, Locking washer
Tab Washer, Steel
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 16, Neutral, Locknut
Nut, Steel, M 80x2
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 4 Nyloc, Neutral, Locknut
Nut, Steel, M 20x1
MB 10, Neutral, Locking washer
Tab Washer, Steel
MB 4, Neutral, Locking washer
Tab Washer, Steel
MB 9, Neutral, Locking washer
Tab Washer, Steel
MB 13, Neutral, Locking washer
Tab Washer, Steel
MB 2, Neutral, Locking washer
Tab Washer, Steel
MB 27, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.