MB 13, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745724268
MB 44, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745737336
KMT 28, NKE, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 9008745732041
KM 18, NKE, Locknut
Nut, Steel, M 90x2, EAN code: 9008745731815
KM 9, NKE, Locknut
Nut, Steel, M 45x1.5, EAN code: 9008745725852
KMT 16, NKE, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 9008745731983
KMT 6, NKE, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 9008745233715
MB 10, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745724749
MB 11, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732089
MB 12, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732096
MB 14, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732102
MB 15, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732119
MB 16, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732126
MB 17, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745725869
MB 18, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745720826
MB 19, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732133
MB 20, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745720833
MB 21, NKE, Locking washer
Tab Washer, Steel, EAN code: 9008745732140
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.