KM 14, NKE, Locknut
Nut, Steel, M 70x2, EAN code: 9008745731808
KM 15, NKE, Locknut
Nut, Steel, M 75x2, EAN code: 9008745720765
KM 16, NKE, Locknut
Nut, Steel, M 80x2, EAN code: 9008745722400
KM 17, NKE, Locknut
Nut, Steel, M 85x2, EAN code: 9008745720772
KM 19, NKE, Locknut
Nut, Steel, M 95x2, EAN code: 9008745731822
KM 2, NKE, Locknut
Nut, Steel, M 15x1, EAN code: 9008745720789
KM 20, NKE, Locknut
Nut, Steel, M 100x2, EAN code: 9008745731839
KM 21, NKE, Locknut
Nut, Steel, M 105x2, EAN code: 9008745731846
KM 22, NKE, Locknut
Nut, Steel, M 110x2, EAN code: 9008745731853
KM 23, NKE, Locknut
Nut, Steel, M 115x2, EAN code: 9008745731860
KM 24, NKE, Locknut
Nut, Steel, M 120x2, EAN code: 9008745233142
KM 25, NKE, Locknut
Nut, Steel, M 125x2, EAN code: 9008745731877
KM 26, NKE, Locknut
Nut, Steel, M 130x2, EAN code: 9008745731884
KM 27, NKE, Locknut
Nut, Steel, M 135x2, EAN code: 9008745731891
KM 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745724725
KM 29, NKE, Locknut
Nut, Steel, M 145x2, EAN code: 9008745233197
KM 3, NKE, Locknut
Nut, Steel, M 17x1, EAN code: 9008745731754
KM 30, NKE, Locknut
Nut, Steel, M 150x2, EAN code: 9008745731907
KM 31, NKE, Locknut
Nut, Steel, M 155x3, EAN code: 9008745233227
KM 32, NKE, Locknut
Nut, Steel, M 160x3, EAN code: 9008745233234
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.