KM 33, NKE, Locknut
Nut, Steel, M 165x3, EAN code: 9008745233241
KM 34, NKE, Locknut
Nut, Steel, M 170x3, EAN code: 9008745233258
KM 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233265
KM 38, NKE, Locknut
Nut, Steel, M 190x3, EAN code: 9008745233272
KM 4, NKE, Locknut
Nut, Steel, M 20x1, EAN code: 9008745731761
KM 40, NKE, Locknut
Nut, Steel, M 200x3, EAN code: 9008745233296
KM 5, NKE, Locknut
Nut, Steel, M 25x1.5, EAN code: 9008745731778
KM 6, NKE, Locknut
Nut, Steel, M 30x1.5, EAN code: 9008745233319
KM 7, NKE, Locknut
Nut, Steel, M 35x1.5, EAN code: 9008745731785
KM 8, NKE, Locknut
Nut, Steel, M 40x1.5, EAN code: 9008745724732
KML 24, NKE, Locknut
Nut, Steel, M 120x2, EAN code: 9008745233357
KML 26, NKE, Locknut
Nut, Steel, M 130x2, EAN code: 9008745233364
KML 28, NKE, Locknut
Nut, Steel, M 140x2, EAN code: 9008745233371
KML 30, NKE, Locknut
Nut, Steel, M 150x2, EAN code: 9008745233388
KML 32, NKE, Locknut
Nut, Steel, M 160x3, EAN code: 9008745233395
KML 34, NKE, Locknut
Nut, Steel, M 170x3, EAN code: 9008745233401
KML 36, NKE, Locknut
Nut, Steel, M 180x3, EAN code: 9008745233418
KML 38, NKE, Locknut
Nut, Steel, M 190x3, EAN code: 9008745233425
KML 40, NKE, Locknut
Nut, Steel, M 200x3, EAN code: 9008745233432
KMT 0, NKE, Precision Lock nut
Nut, Steel, M 10x0.75, EAN code: 9008745233449
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.