HM 3160, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 300x4, EAN code: 9008745224485
HM 3164, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 320x5, EAN code: 9008745224492
HM 3168, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 340x5, EAN code: 9008745224508
HM 42 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 210x4, EAN code: 9008745224584
HM 44 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 9008745224591
HM 46 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 230x4, EAN code: 9008745224607
HM 48 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 9008745224614
HM 50 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 250x4, EAN code: 9008745224621
HM 52 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 9008745224638
HM 56 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 9008745224652
HM 58 T, NKE, T lock/dismounting nut
Nut, Steel, Tr 290x4, EAN code: 9008745224669
HM 62 T, NKE, T lock/dismounting nut
Nut, Steel, EAN code: 9008745224683
KMT 18, NKE, Precision Lock nut
Nut, Steel, M 90x2, EAN code: 9008745731990
KMT 19, NKE, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 9008745732003
KMT 2, NKE, Precision Lock nut
Nut, Steel, M 15x1, EAN code: 9008745233562
KMT 20, NKE, Precision Lock nut
Nut, Steel, M 100x2, EAN code: 9008745732010
KMT 22, NKE, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 9008745732027
KMT 24, NKE, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 9008745233593
KMT 26, NKE, Precision Lock nut
Nut, Steel, M 130x2, EAN code: 9008745732034
KMT 3, NKE, Precision Lock nut
Nut, Steel, M 17x1, EAN code: 9008745731914
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.