MB 27, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116096
MB 28, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116102
MB 29, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116126
MB 30, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116140
MB 31, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116171
MB 32, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116188
MB 33, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116201
MB 34, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116225
MB 36, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116256
MB 4, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115624
MB 44, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116317
MB 48, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023116324
MB 5, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115655
MB 6, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115662
MB 7, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115686
MB 9, RHP, Locking washer
Tab Washer, Steel, EAN code: 00747023115723
KM 0, RHP, Locknut
Nut, Steel, M 10x0.75, EAN code: 00747023128259
KM 1, RHP, Locknut
Nut, Steel, M 12x1, EAN code: 00747023116362
KM 10, RHP, Locknut
Nut, Steel, M 50x1.5, EAN code: 00747023116454
KM 11, RHP, Locknut
Nut, Steel, M 55x2, EAN code: 00747023116461
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.