1-12 of 12 products
KM 16, SKF, Locknut
Nut, Steel, M 80x2, EAN code: 7316571770239
Brand | SKF |
---|---|
Mfr Part No. | KM 16 |
KMK 16, SKF, Lock nut with integral locking screw
Nut, Steel, M 80x2, EAN code: 7316570831580
Brand | SKF |
---|---|
Mfr Part No. | KMK 16 |
KMFE 16, SKF, Lock nut with integral locking screw
Nut, Steel, M80x2, EAN code: 7316571585574
Brand | SKF |
---|---|
Mfr Part No. | KMFE 16 |
KM 16 Nyloc, Neutral, Locknut
Nut, Steel, M 80x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 16 Nyloc |
KMT 15, SKF, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 7316577655042
Brand | SKF |
---|---|
Mfr Part No. | KMT 15 |
KM 16, Neutral, Locknut
Nut, Steel, M 80x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 16 |
KMT 15, NKE, Precision Lock nut
Nut, Steel, M 75x2, EAN code: 9008745731976
Brand | NKE |
---|---|
Mfr Part No. | KMT 15 |
KM 16, FAG, Locknut
Nut, Steel, M80x2, EAN code: 4012801174350
Brand | FAG |
---|---|
Mfr Part No. | KM 16 |
KM 16, NKE, Locknut
Nut, Steel, M 80x2, EAN code: 9008745722400
Brand | NKE |
---|---|
Mfr Part No. | KM 16 |
KM 16, RHP, Locknut
Nut, Steel, M 80x2, EAN code: 00747023116515
Brand | RHP |
---|---|
Mfr Part No. | KM 16 |
KM 16, Timken, Locknut
Nut, Steel, M 80x2, EAN code: 0087796028685
Brand | Timken |
---|---|
Mfr Part No. | KM 16 |
ZM80, INA, Precision locknut
Precision locknut, Steel, M80X2, EAN code: 4012802137996
Brand | INA |
---|---|
Mfr Part No. | ZM80 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.