1-15 of 15 products
KM 17, SKF, Locknut
Nut, Steel, M 85x2, EAN code: 7316571770208
Brand | SKF |
---|---|
Mfr Part No. | KM 17 |
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
Brand | SKF |
---|---|
Mfr Part No. | KMK 17 |
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 17 |
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
Brand | SKF |
---|---|
Mfr Part No. | KMT 16 |
KM 17 Nyloc, Neutral, Locknut
Nut, Steel, M 85x2
Brand | Neutral |
---|---|
Mfr Part No. | KM 17 Nyloc |
KMFE 17, SKF, Lock nut with integral locking screw
Nut, Steel, M85x2, EAN code: 7316571585628
Brand | SKF |
---|---|
Mfr Part No. | KMFE 17 |
KMTA 16, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 80x2, EAN code: 7316577655301
Brand | SKF |
---|---|
Mfr Part No. | KMTA 16 |
KM 17, Timken, Locknut
Nut, Steel, M 85x2, EAN code: 0087796028692
Brand | Timken |
---|---|
Mfr Part No. | KM 17 |
AM80, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M80X2, EAN code: 4054364116354
Brand | INA |
---|---|
Mfr Part No. | AM80 |
KM 17, FAG, Locknut
Nut, Steel, M85x2, EAN code: 4012801052580
Brand | FAG |
---|---|
Mfr Part No. | KM 17 |
KM 17, NKE, Locknut
Nut, Steel, M 85x2, EAN code: 9008745720772
Brand | NKE |
---|---|
Mfr Part No. | KM 17 |
KM 17, RHP, Locknut
Nut, Steel, M 85x2, EAN code: 00747023116522
Brand | RHP |
---|---|
Mfr Part No. | KM 17 |
KMT 16, NKE, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 9008745731983
Brand | NKE |
---|---|
Mfr Part No. | KMT 16 |
ZM85, INA, Precision locknut
Precision locknut, Steel, M85X2, EAN code: 4012802469998
Brand | INA |
---|---|
Mfr Part No. | ZM85 |
ZMA70/110, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M70X2, EAN code: 4012802079562
Brand | INA |
---|---|
Mfr Part No. | ZMA70/110 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.