1-12 of 12 products
KM 5, SKF, Locknut
Nut, Steel, M 25x1.5, EAN code: 7316577758880
Brand | SKF |
---|---|
Mfr Part No. | KM 5 |
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
Brand | Neutral |
---|---|
Mfr Part No. | KM 5 Nyloc |
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
Brand | SKF |
---|---|
Mfr Part No. | KMK 5 |
KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
Brand | Neutral |
---|---|
Mfr Part No. | KM 5 |
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
Brand | SKF |
---|---|
Mfr Part No. | KMFE 5 |
KM 5, FAG, Locknut
Nut, Steel, M25x1, 5, EAN code: 4012801052191
Brand | FAG |
---|---|
Mfr Part No. | KM 5 |
KM 5, Timken, Locknut
Nut, Steel, M 25x1.5, EAN code: 0087796028807
Brand | Timken |
---|---|
Mfr Part No. | KM 5 |
AM20, INA, Precision locknuts AM, segments for clamping
Precision locknut, Steel, M20X1, EAN code: 4012802032130
Brand | INA |
---|---|
Mfr Part No. | AM20 |
KM 5, NKE, Locknut
Nut, Steel, M 25x1.5, EAN code: 9008745731778
Brand | NKE |
---|---|
Mfr Part No. | KM 5 |
KM 5, RHP, Locknut
Nut, Steel, M 25x1.5, EAN code: 00747023116409
Brand | RHP |
---|---|
Mfr Part No. | KM 5 |
ZM25, INA, Precision locknut
Precision locknut, Steel, M25X1, 5, EAN code: 4012802079333
Brand | INA |
---|---|
Mfr Part No. | ZM25 |
ZMA20/38, INA, Precision locknuts ZMA, locking pegs, radially arranged, heavy series
Precision locknut, Steel, M20X1, EAN code: 4012802079401
Brand | INA |
---|---|
Mfr Part No. | ZMA20/38 |
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.