W 08, SKF, Locking washer
Washer, Steel, EAN code: 7316571385532
MB 2, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757968
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
TW111, Timken, Locking washer
Washer, Steel, EAN code: 0053893821917
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
KMT 38, SKF, Precision Lock nut
Nut, Steel, M 190x3, EAN code: 7316577655172
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
KM 6 Nyloc, Neutral, Locknut
Nut, Steel, M 30x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
MB 22, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011657
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
KM 29, SKF, Locknut
Nut, Steel, M 145x2, EAN code: 7316577011275
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.