KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
KMTA 5, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 25x1.5, EAN code: 7316577655196
MB 32, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011732
TW114, Timken, Locking washer
Washer, Steel, EAN code: 0053893822099
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
W 30, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
Z 205, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351162
KM 36, SKF, Locknut
Nut, Steel, M 180x3, EAN code: 7316577011336
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KMT 20, Neutral, Precision Lock nut
Nut, Steel, M 100x2
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
KM 27, SKF, Locknut
Nut, Steel, M 135x2, EAN code: 7316577011251
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
MB 23, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011664
TW107, Timken, Locking washer
Washer, Steel, EAN code: 0053893822044
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
Z 006, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571326160
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.