KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
ZW 80X90, SKF, Spacing washer
Washer, Steel, EAN code: 7316571385631
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 25, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011671
MB 4, Neutral, Locking washer
Tab Washer, Steel
MB 44, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011787
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
KM 1, Neutral, Locknut
Nut, Steel, M 12x1
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
W 14, SKF, Locking washer
Washer, Steel, EAN code: 7316571385594
AN 20, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660443
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
KM 29, SKF, Locknut
Nut, Steel, M 145x2, EAN code: 7316577011275
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
KMTA 20, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 100x2, EAN code: 7316577655349
This item is not currently available from our stocks.
Despatch date information is on request.
TW116, Timken, Locking washer
Washer, Steel, EAN code: 0053893816753
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.