W 20, SKF, Locking washer
Washer, Steel, EAN code: 7316576676154
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
MB 56, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011794
KM 34, SKF, Locknut
Nut, Steel, M 170x3, EAN code: 7316577011329
TN07, Timken, Lock nut
Nut, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 10, Neutral, Locking washer
Tab Washer, Steel
MB 8 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316572309988
KMT 4, SKF, Precision Lock nut
Nut, Steel, M 20x1, EAN code: 7316577662736
KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
KM 15, Neutral, Locknut
Nut, Steel, M 75x2
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 24, Neutral, Locknut
Nut, Steel, M 120x2
KMT 12, SKF, Precision Lock nut
Nut, Steel, M 60x2, EAN code: 7316577294982
TW130, Timken, Locking washer
Washer, Steel, EAN code: 0053893822167
ZW 70X80, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351100
This item is not currently available from our stocks.
Despatch date information is on request.
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 5, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028357
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.