AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
KM 12 Nyloc, Neutral, Locknut
Nut, Steel, M 60x2
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
This item is not currently available from our stocks.
Despatch date information is on request.
KM 17, Neutral, Locknut
Nut, Steel, M 85x2
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KM 34, Neutral, Locknut
Nut, Steel, M 170x3
KMFE 11, SKF, Lock nut with integral locking screw
Nut, Steel, M55x2, EAN code: 7316571585192
KMFE 4, SKF, Lock nut with integral locking screw
Nut, Steel, M20x1, EAN code: 7316571584683
KMT 9, SKF, Precision Lock nut
Nut, Steel, M 45x1.5, EAN code: 7316577294951
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
MB 20, Neutral, Locking washer
Tab Washer, Steel
MB 21, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011640
MB 4, Neutral, Locking washer
Tab Washer, Steel
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.