HM 44 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 220x4, EAN code: 7316577010629
KM 8, Neutral, Locknut
Nut, Steel, M 40x1.5
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 18, SKF, Lock nut with integral locking screw
Nut, Steel, M 90x2, EAN code: 7316571022550
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 20, Neutral, Locknut
Nut, Steel, M 100x2
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
W 06, SKF, Locking washer
Washer, Steel, EAN code: 7316571396620
KM 40, SKF, Locknut
Nut, Steel, M 200x3, EAN code: 7316577011350
KMT 16, SKF, Precision Lock nut
Nut, Steel, M 80x2, EAN code: 7316577655059
TW124, Timken, Locking washer
Washer, Steel, EAN code: 0053893815794
TAN130, Timken, Lock nut
Nut, Steel, EAN code: 0053893004136
This item is not currently available from our stocks.
Despatch date information is on request.
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
KM 18, Neutral, Locknut
Nut, Steel, M 90x2
KMT 14, SKF, Precision Lock nut
Nut, Steel, M 70x2, EAN code: 7316577656513
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
KMT 22, SKF, Precision Lock nut
Nut, Steel, M 110x2, EAN code: 7316577655097
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
TW118, Timken, Locking washer
Washer, Steel, EAN code: 0053893822105
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.