MB 0, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570189964
MB 17, Neutral, Locking washer
Tab Washer, Steel
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
TW128, Timken, Locking washer
Washer, Steel, EAN code: 0053893822150
KMFE 9, SKF, Lock nut with integral locking screw
Nut, Steel, M45x1.5, EAN code: 7316571585109
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 18, Neutral, Locking washer
Tab Washer, Steel
MB 19, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011626
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
W 18, SKF, Locking washer
Washer, Steel, EAN code: 7316576676130
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
MB 5, Neutral, Locking washer
Tab Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.