HM 3168, NKE, Lock nut with locking clip and screw
Locknut, Steel, Tr 340x5, EAN code: 9008745224508
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 34, SKF, Precision Lock nut
Nut, Steel, M 170x3, EAN code: 7316577655158
KM 24, NKE, Locknut
Nut, Steel, M 120x2, EAN code: 9008745233142
W 22, SKF, Locking washer
Washer, Steel, EAN code: 7316576676178
TW108, Timken, Locking washer
Washer, Steel, EAN code: 0053893822051
TW115, Timken, Locking washer
Washer, Steel, EAN code: 0053893821924
This item is not currently available from our stocks.
Despatch date information is on request.
TAN140, Timken, Lock nut
Nut, Steel, EAN code: 0053893004563
TAN24, Timken, Lock nut
Nut, Steel, EAN code: 0053893001531
ZW 42X52, SKF, Spacing washer
Washer, Steel, EAN code: 7316571351087
This item is not currently available from our stocks.
Despatch date information is on request.
MB 1 STAINLESS, Neutral, Locking washer
Tab Washer, Stainless steel
MB 10 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 10 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571158815
MB 12 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 13, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880243
MB 14 NP, Neutral, Locking washer
Tab Washer, Nickel plated
MB 16, Neutral, Locking washer
Tab Washer, Steel
MB 18A, Neutral, Locking washer
Tab Washer, Steel
MB 19, FAG, Locking washer
Tab Washer, Steel, EAN code: 4026677180193
MB 22, Neutral, Locking washer
Tab Washer, Steel
MB 22, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028272
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.