N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
MB 14, Neutral, Locking washer
Tab Washer, Steel
MB 17, Neutral, Locking washer
Tab Washer, Steel
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
KML 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316571048918
MB 40, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001399
TW122, Timken, Locking washer
Washer, Steel, EAN code: 0053893822136
This item is not currently available from our stocks.
Despatch date information is on request.
TW128, Timken, Locking washer
Washer, Steel, EAN code: 0053893822150
This item is not currently available from our stocks.
Despatch date information is on request.
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
MB 15, Neutral, Locking washer
Tab Washer, Steel
MB 18, Neutral, Locking washer
Tab Washer, Steel
W 11, SKF, Locking washer
Washer, Steel, EAN code: 7316571385563
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
HM 48 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 240x4, EAN code: 7316577010643
TW065, Timken, Locking washer
Washer, Steel, EAN code: 0053893200989
This item is not currently available from our stocks.
Despatch date information is on request.
MB 1, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570872781
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 25, Neutral, Locknut
Nut, Steel, M 125x2
KMK 17, SKF, Lock nut with integral locking screw
Nut, Steel, M 85x2, EAN code: 7316570228083
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.