MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
MB 14, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571773728
MB 20, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011633
W 26, SKF, Locking washer
Washer, Steel, EAN code: 7316576676192
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
This item is not currently available from our stocks.
Despatch date information is on request.
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
KM 28, SKF, Locknut
Nut, Steel, M 140x2, EAN code: 7316577011268
KM 32, SKF, Locknut
Nut, Steel, M 160x3, EAN code: 7316577011305
KMFE 5, SKF, Lock nut with integral locking screw
Nut, Steel, M25x1.5, EAN code: 7316571584775
MB 15, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770260
MB 2, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757968
TW103, Timken, Locking washer
Washer, Steel, EAN code: 0053893822013
This item is not currently available from our stocks.
Despatch date information is on request.
KM 14 Nyloc, Neutral, Locknut
Nut, Steel, M 70x2
KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
AN 15, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353623
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
This item is not currently available from our stocks.
Despatch date information is on request.
KM 10 Nyloc, Neutral, Locknut
Nut, Steel, M 50x1.5
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.