KM 2 Nyloc, Neutral, Locknut
Nut, Steel, M 15x1
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
KMK 14, SKF, Lock nut with integral locking screw
Nut, Steel, M 70x2, EAN code: 7316570280166
This item is not currently available from our stocks.
Despatch date information is on request.
AN 16, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353487
KM 10 Nyloc, Neutral, Locknut
Nut, Steel, M 50x1.5
KM 7, Neutral, Locknut
Nut, Steel, M 35x1.5
W 28, SKF, Locking washer
Washer, Steel, EAN code: 7316576676208
W 07, SKF, Locking washer
Washer, Steel, EAN code: 7316571385525
KMT 24, SKF, Precision Lock nut
Nut, Steel, M 120x2, EAN code: 7316577655103
KMK 20, SKF, Lock nut with integral locking screw
Nut, Steel, M 100x2, EAN code: 7316570447637
AN 17, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571353494
MB 3, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570545975
KM 0, SKF, Locknut
Nut, Steel, M 10x0.75, EAN code: 7316571353432
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KM 5 Nyloc, Neutral, Locknut
Nut, Steel, M 25x1.5
KMFE 8, SKF, Lock nut with integral locking screw
Nut, Steel, M40x1.5, EAN code: 7316571585093
KMK 6, SKF, Lock nut with integral locking screw
Nut, Steel, M 30x1.5, EAN code: 7316577711137
KM 13, Neutral, Locknut
Nut, Steel, M 65x2
KM 30, SKF, Locknut
Nut, Steel, M 150x2, EAN code: 7316577011282
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.