KMTA 6, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 30x1.5, EAN code: 7316577655202
MB 12, FAG, Locking washer
Tab Washer, Steel, EAN code: 4054369880229
This item is not currently available from our stocks.
Despatch date information is on request.
MB 15, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796028159
MB 36, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011763
MB 9 A, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571155333
This item is not currently available from our stocks.
Despatch date information is on request.
MBL 28, SKF, Locking washer
Securing plate, Steel, EAN code: 7316571081526
MBL 30, SKF, Locking washer
Securing plate, Steel, EAN code: 7316577055644
MS 3044, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011800
MS 3060, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011848
MS 3068-64, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011855
This item is not currently available from our stocks.
Despatch date information is on request.
This item is not currently available from our stocks.
Despatch date information is on request.
TAN128, Timken, Lock nut
Nut, Steel, EAN code: 0053893004075
TAN136, Timken, Lock nut
Nut, Steel, EAN code: 0053893004280
This item is not currently available from our stocks.
Despatch date information is on request.
TAN20, Timken, Lock nut
Nut, Steel, EAN code: 0053893001395
This item is not currently available from our stocks.
Despatch date information is on request.
TW103, Timken, Locking washer
Washer, Steel, EAN code: 0053893822013
This item is not currently available from our stocks.
Despatch date information is on request.
TW113, Timken, Locking washer
Washer, Steel, EAN code: 0053893822082
TW117, Timken, Locking washer
Washer, Steel, EAN code: 0053893821337
This item is not currently available from our stocks.
Despatch date information is on request.
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.