KM 2, SKF, Locknut
Nut, Steel, M 15x1, EAN code: 7316577754301
KM 21, SKF, Locknut
Nut, Steel, M 105x2, EAN code: 7316577011190
KMFE 14, SKF, Lock nut with integral locking screw
Nut, Steel, M70x2, EAN code: 7316571585345
KMFE 6, SKF, Lock nut with integral locking screw
Nut, Steel, M30x1.5, EAN code: 7316571584782
KMFE 7, SKF, Lock nut with integral locking screw
Nut, Steel, M35x1.5, EAN code: 7316571584799
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 26, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011688
MB 29, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011718
N 05, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571278735
W 05, SKF, Locking washer
Washer, Steel, EAN code: 7316571385518
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
KM 34, SKF, Locknut
Nut, Steel, M 170x3, EAN code: 7316577011329
KMK 2, SKF, Lock nut with integral locking screw
Nut, Steel, M 15x1, EAN code: 7316571483528
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KMT 38, SKF, Precision Lock nut
Nut, Steel, M 190x3, EAN code: 7316577655172
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
MB 52, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001412
HM 52 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 260x4, EAN code: 7316577010650
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KMT 4, SKF, Precision Lock nut
Nut, Steel, M 20x1, EAN code: 7316577662736
MB 6, Neutral, Locking washer
Tab Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.