KMK 11, SKF, Lock nut with integral locking screw
Nut, Steel, M 55x2, EAN code: 7316577711755
KM 15, SKF, Locknut
Nut, Steel, M 75x2, EAN code: 7316571770253
KMK 5, SKF, Lock nut with integral locking screw
Nut, Steel, M 25x1.5, EAN code: 7316571278209
MB 17, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571770215
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
W 09, SKF, Locking washer
Washer, Steel, EAN code: 7316571385549
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
W 24, SKF, Locking washer
Washer, Steel, EAN code: 7316576676185
This item is not currently available from our stocks.
Despatch date information is on request.
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
KM 7 Nyloc, Neutral, Locknut
Nut, Steel, M 35x1.5
W 10, SKF, Locking washer
Washer, Steel, EAN code: 7316571385556
TN065, Timken, Lock nut
Nut, Steel, EAN code: 0053893002859
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
KM 1, SKF, Locknut
Nut, Steel, M 12x1, EAN code: 7316571353449
MB 13, Neutral, Locking washer
Tab Washer, Steel
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
KM 24, SKF, Locknut
Nut, Steel, M 120x2, EAN code: 7316577011220
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.