MB 48, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001405
MB 52, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577001412
MS 3056, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577011831
TAN17, Timken, Lock nut
Nut, Steel, EAN code: 0053893001319
This item is not currently available from our stocks.
Despatch date information is on request.
TW121, Timken, Locking washer
Washer, Steel, EAN code: 0053893817675
TN12, Timken, Lock nut
Nut, Steel, EAN code: 0053893000978
W 17, SKF, Locking washer
Washer, Steel, EAN code: 7316571385617
This item is not currently available from our stocks.
Despatch date information is on request.
W 19, SKF, Locking washer
Washer, Steel, EAN code: 7316576676147
W 40, SKF, Locking washer
Washer, Steel
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 15, SKF, Lock nut with integral locking screw
Nut, Steel, M75x2, EAN code: 7316571585352
KMK 10, SKF, Lock nut with integral locking screw
Nut, Steel, M 50x1.5, EAN code: 7316570965087
KMK 12, SKF, Lock nut with integral locking screw
Nut, Steel, M 60x2, EAN code: 7316570379334
KMT 36, SKF, Precision Lock nut
Nut, Steel, M 180x3, EAN code: 7316577655165
AN 28, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660498
MB 22, Neutral, Locking washer
Tab Washer, Steel
MB 29, Neutral, Locking washer
Tab Washer, Steel
ZW 85X100, SKF, Spacing washer
Washer, Steel
KM 14, Timken, Locknut
Nut, Steel, M 70x2, EAN code: 0013992173089
KMFE 12, SKF, Lock nut with integral locking screw
Nut, Steel, M60x2, EAN code: 7316571585307
This item is not currently available from our stocks.
Despatch date information is on request.
KMK 0, SKF, Lock nut with integral locking screw
Nut, Steel, M 10x0.75, EAN code: 7316571483504
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.