KM 5, Neutral, Locknut
Nut, Steel, M 25x1.5
KM 9 Nyloc, Neutral, Locknut
Nut, Steel, M 45x1.5
KMT 11, SKF, Precision Lock nut
Nut, Steel, M 55x2, EAN code: 7316577655028
MB 18, Neutral, Locking washer
Tab Washer, Steel
MS 3052-48, SKF, Locking clip
Securing plate, Steel, EAN code: 7316577058348
N 14, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385471
W 16, SKF, Locking washer
Washer, Steel, EAN code: 7316571385600
Z 307, SKF, Sealing washer, standard design
Washer, Steel, EAN code: 7316571351230
KM 38, SKF, Locknut
Nut, Steel, M 190x3, EAN code: 7316577011343
This item is not currently available from our stocks.
Despatch date information is on request.
KMFE 22, SKF, Lock nut with integral locking screw
Nut, Steel, M110x2, EAN code: 7316571587844
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 19, SKF, Precision Lock nut
Nut, Steel, M 95x2, EAN code: 7316577291882
This item is not currently available from our stocks.
Despatch date information is on request.
KMT 40, SKF, Precision Lock nut
Nut, Steel, M 200x3, EAN code: 7316577655189
This item is not currently available from our stocks.
Despatch date information is on request.
AN 18, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660429
KM 11, Neutral, Locknut
Nut, Steel, M 55x2
KM 4, Neutral, Locknut
Nut, Steel, M 20x1
KMT 5, SKF, Precision Lock nut
Nut, Steel, M 25x1.5, EAN code: 7316577662743
KMT 7, SKF, Precision Lock nut
Nut, Steel, M 35x1.5, EAN code: 7316577292605
KMTA 11, SKF, KMTA precision lock nut with locking pins
Nut, Steel, M 55x1.5, EAN code: 7316577655257
MB 4, Neutral, Locking washer
Tab Washer, Steel
Z 206 F, SKF, Sealing washers, F design
Washer, Steel
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.