MB 6, SKF, Locking washer
Tab Washer, Steel
MB 19, Neutral, Locking washer
Tab Washer, Steel
KM 19, Neutral, Locknut
Nut, Steel, M 95x2
KM 19, SKF, Locknut
Nut, Steel, M 95x2, EAN code: 7316577011176
KM 8, SKF, Locknut
Nut, Steel, M 40x1.5
MB 24, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316571498904
KM 10, SKF, Locknut
Nut, Steel, M 50x1.5, EAN code: 7316571353463
KM 9, SKF, Locknut
Nut, Steel, M 45x1.5, EAN code: 7316577758323
KMT 28, SKF, Precision Lock nut
Nut, Steel, M 140x2, EAN code: 7316577655127
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 12, SKF, Locknut
Nut, Steel, M 60x2
KM 6, SKF, Locknut
Nut, Steel, M 30x1.5, EAN code: 7316577757432
KM 7, SKF, Locknut
Nut, Steel, M 35x1.5, EAN code: 7316571353456
KM 13 Nyloc, Neutral, Locknut
Nut, Steel, M 65x2
KM 20, SKF, Locknut
Nut, Steel, M 100x2, EAN code: 7316577011183
KM 3, SKF, Locknut
Nut, Steel, M 17x1, EAN code: 7316571249797
N 07, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280707
MB 12, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758538
MB 10, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757449
MB 9, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577758316
KM 11, SKF, Locknut
Nut, Steel, M 55x2, EAN code: 7316577758897
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.