MB 11, Neutral, Locking washer
Tab Washer, Steel
MB 12, Neutral, Locking washer
Tab Washer, Steel
MB 17, Neutral, Locking washer
Tab Washer, Steel
MB 27, Neutral, Locking washer
Tab Washer, Steel
MB 40, Neutral, Locking washer
Tab Washer, Steel
MB 4, Timken, Locking washer
Tab Washer, Steel, EAN code: 0087796213104
MB 8, Neutral, Locking washer
Tab Washer, Steel
N 06, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280738
W 20, SKF, Locking washer
Washer, Steel, EAN code: 7316576676154
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
HM 3044, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 220x4, EAN code: 7316577010698
HM 3056, SKF, HM lock nut with metric trapezoidal threads, locked on shaft by MS locking clip
Locknut, Steel, Tr 280x4, EAN code: 7316577010728
HM 42 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 210x4, EAN code: 7316577010612
HM 56 T, SKF, T lock/dismounting nut
Nut, Steel, Tr 280x4, EAN code: 7316577010667
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 11, FAG, Locknut
Nut, Steel, M55x2, EAN code: 4012801174329
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 14 Nyloc, Neutral, Locknut
Nut, Steel, M 70x2
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 24, FAG, Locknut
Nut, Steel, M120x2, EAN code: 4012801052702
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 25, SKF, Locknut
Nut, Steel, M 125x2, EAN code: 7316577011237
KMT 13, SKF, Precision Lock nut
Nut, Steel, M 65x2, EAN code: 7316577655035
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.