N 11, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385686
MB 10, Neutral, Locking washer
Tab Washer, Steel
N 08, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571280714
KM 18, SKF, Locknut
Nut, Steel, M 90x2, EAN code: 7316577011169
AN 30, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660504
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
KM 10, Neutral, Locknut
Nut, Steel, M 50x1.5
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
W 30, SKF, Locking washer
Washer, Steel
This item is currently out of stock.
You may place your order now and we will dispatch it as soon as stock arrives.
AN 24, SKF, AN inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316576660474
KM 8 Nyloc, Neutral, Locknut
Nut, Steel, M 40x1.5
KMT 6, SKF, Precision Lock nut
Nut, Steel, M 30x1.5, EAN code: 7316577291851
KM 29, SKF, Locknut
Nut, Steel, M 145x2, EAN code: 7316577011275
MB 11, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570627305
MB 18, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577011619
MB 8, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316570517996
N 09, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385501
W 12, SKF, Locking washer
Washer, Steel, EAN code: 7316571385570
MB 7, SKF, Locking washer
Tab Washer, Steel, EAN code: 7316577757456
N 10, SKF, N inch lock nut, requiring a keyway
Nut, Steel, EAN code: 7316571385495
KM 22, SKF, Locknut
Nut, Steel, M 110x2, EAN code: 7316577011206
KM 26, SKF, Locknut
Nut, Steel, M 130x2, EAN code: 7316577011244
Locknut and washer applications
Lock Nuts are used to locate bearings and other components on shafts, as well as, to facilitate mounting and dismounting of bearings on withdrawal sleeves or tapered journals. Lock Nuts have equally spaced slots around the outside diameter to facilitate the use of a hook spanner or impact spanner.
Locking Washers are used to engage a groove in the shaft and secure the Lock Nut in position. When a washer with increased strength is needed, the MB. A design locking washer is the ideal choice.
Locking Clips are attached to the Shaft Nut using a screw with a hexagonal head.
Locking Plates are attached in the same way as the Locking Clips and are also supplied with a steel wire to pass through the holes in the head of each screw. The ends of the wire should be twisted together to prevent loosening of the screws.